| |
 Industrial Roller Shutter Door
|
|
Fire Resisting Roller Shutters
|
| |
Industrial Roller Shutters are available in both insulated double-skin steel
slat and non-insulated single-skin traditional steel slat.
They are generally operated electrically via either a 240v single-phase or 415v
three-phase electric motor unit with a manual override mechanism for use in the
event of power failure. Various control, actuation and safety systems to
control the doors and provide a safer working environment. In certain cases,
manual operation is still available either by endless hand-chain or self
coiling (push up/pull down). Single-skin traditional Roller Shutter Doors are
galvanised finish as standard with HP200 Colorcoat Plastisol finish or
Polyester Powder Coat paint finish in a standard/stock BS4800 or RAL range
colour is available at an extra cost. Insulated double-skin Roller Shutter
Doors are available in a pre-finished colour coat in a choice of 8 colours as
standard. |
 |
Fire Resisting Roller Shutters (assessed up to 4 Hours to BS 476 Part 22) are
constructed using a single-skin traditional steel slat.
They are generally operated electrically via either a 240v single-phase or 415v
three-phase electric motor unit to provide a controlled descent in the event of
fire.
A manual override mechanism for use in the event of power failure is fitted as
standard with Battery Back-up available at an extra cost. Connection to a Fire
Alarm or Smoke/Heat detector system to enable automatic closure is achieved
through our FDI Control Panel or a Solenoid Release Unit.
Audio/Visual Warning Systems to inform imminent closure of a Fire Shutter to
personnel within the vicinity are also available at an additional cost.
The standard finish is galvanised with Polyester Powder Coat paint finish in a
standard/stock BS4800 or RAL range colour available at an extra cost. |
|
|
|
|
| |
High Speed Energy Saving Door
|
|
PVC Strip Curtain
|
|
High Speed Energy Saving Doors (Rapid Roll) are designed for applications where
they will receive intensive use.
Because of their operating speed, they dramatically reduce your energy costs,
CO2 emissions, draughts and temperature loss as well as optimising traffic
flow.
They significantly reduce energy costs and create more comfortable working
conditions. Productivity is also improved due to drastically reduced operating
times. A typical Industrial Door @ 4000mm2 would take approximately 90 seconds
to complete its operating cycle. A high speed door operating at 1 metre per
second with a paused time in the open position of 10 seconds, would complete
its operating cycle in 18 seconds, meaning the door would be open 80% less per
cycle.
They are available in both Rolling and Folding configurations and are
electrically operated as standard. Safety Photocells and Contact Safety Edges
are a standard item. Various control and actuation systems along with a choice
of 8 colours are available to suit your requirements. |
|
Where energy saving is of paramount importance but a smaller initial budget is
available, a PVC Strip-Curtain assembly is an ideal choice of product.
They are an ideal way to help prevent entry of airborne pests and a cost
effective method of cutting heat loss or retaining chilled air in an area where
you need to control the environment such as in a warehouse, factory or food
processing plant.
With a range of strip sizes, grades, colours and tracks to suit different
applications, opening sizes and traffic type (pedestrian, pallet trucks and/or
fork-trucks) they are available as static or sliding assembly. Stainless steel
tracks are used for mounting the strips for areas such as food preparation and
manufacture facilities where maximum hygiene is essential. For advice on what
type of Strip Curtain is best suited to your requirements, contact our sales
department. |
| |
|
|
|
| |
Hinged Steel Door-sets
|
Hinged Steel Fire Resisting Door
|
| |
Hinged Steel Door-sets are available in 3 formats, Hinged Steel Fire Exit
Doors, Hinged Steel Security Doors and Hinged Steel Fire Resisting Doors, in
both Single and Double-leaf.
Whilst these doors are also a bespoke item, in certain circumstances they are
often readily available in a standard/stock size with a standard Hardware
Fit-out and a standard finish, significantly reducing costs and availability
periods. Where it is not possible to use a stock Door-set due to size and/or
specification and a custom-built item is required, door-sets can be tailor made
to suit.
The door-sets can be primer painted (ready for site painting by others after
installation) or finished in Polyester Powder Coat paint to a standard/stock
BS4800 or RAL range colour prior to installation. |
|
Hinged Steel Fire Resisting Doors are also available as a standard/stock item
or custom made and are available up to 6 Hours Single-leaf or 4 Hours
Double-leaf (to BS 476 Part 22).
As standard, the door-sets would generally be fitted with Class 13 stainless
steel Hinges, smoke seals, a DIN std latch, a pair of 19mm round stainless
steel lever Handles and a fire rated Door Closer.
Options available at extra cost include Panic Bars, Louvre Panels and Glazed
Vision Panels. |
| |
|
|
|
| |
Hinged Steel Security Door
|
|
Hinged Steel Fire Exit Door
|
| |
Hinged Steel Security Doors are also available as a standard/stock item or
custom made.
They would generally be fitted with attack resistant hinges, dog-bolts, an
anti-jemmy astragal and a locking system such as a Sash or Deadlock with a
key-operated cylinder and lever handles.
Multi-point locking can be incorporated into the locking system where
additional security is required.
If required, we are able to offer door-sets to LPS 1175 Standard up to Level 5.
|
|
Hinged Steel Fire Exit Doors are available as a standard/stock item or custom
made.
They would generally be fitted with a Panic or Emergency Exit Device such as a
Panic Bar, Panic Latch, Panic Bolt or Push Pad to enable quick and easy escape
in the event of emergency.
An external locking handle to enable external access (which can be overridden
internally by the panic device) can be installed at extra cost.
The door would be fitted with a sign stating "Push bar to open" or
similar indicating a designated means of escape. |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
